View 10A1-T_349106.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SILICON RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 10 Amperes
FEATURES
* * * * *
10A05 THRU 10A10
High surge current capability Low leakage Low forward voltage drop High current capability Low lost
R-6
* * * * *
MECHANICAL DATA
Case: Molded plastic black body Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.08 gram
.052 (1.3) 0.96 (24.5) MIN. .048 (1.2)
DIA.
.360 (9.1) .340 (8.6) .360 (9.1) .340 (8.6) DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
0.96 (24.5) MIN.
Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 50 o C Peak Forward Surge Current IFM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 3) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted)
O
SYMBOL VRRM VRMS VDC IO I FSM RqJA CJ T J, T STG
10A05 50 35 50
10A1 100 70 100
10A2 200 140 200
10A4 400 280 400 10 400 9 135 -55 to + 150
10A6 600 420 600
10A8 800 560 800
10A10 1000 700 1000
UNITS Volts Volts Volts Amps Amps
0
C/W pF
0
C
CHARACTERISTICS Maximum Forward Voltage at 10A DC Maximum DC Average Reverse Current at Rated DC Blocking Voltage @T A = 25 o C @T A = 100 o C
SYMBOL VF IR
10A05
10A1
10A2
10A4 1.1 10 100 50
10A6
10A8
10A10
UNITS Volts uAmps
Maximum Full Load Reverse Current Average Full Cycle .375" (9.5mm) Lead Length at T L =75 OC NOTES : 1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3. Thernal Resistance: At 9.5mm lead lengths,PCB mounted.
2009-06 REV: A
RATING AND CHARACTERISTICS CURVES ( 10A05 THRU 10A10 )
PEAK FORWARD SURGE CURRENT, (A) 10 AVERAGE FORWARD CURRENT, (A) 8 6 4 2 0
Single Phase Half Wave 60Hz Resistive or Inductive Load
500 400 300 200 100 0
8.3ms Single Half Sine-Wave (JEDED Method)
0
25
50
75
100
125
O
150
175
0
2
4
6
8 10
20
40
60 80 100
AMBIENT TEMPERATURE, ( C)
NUMBER OF CYCLES AT 60Hz
INSTANTANEOUS FORWARD CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (uA)
100
FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE
1000 400
FIG.2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
10
100 TJ = 100 OC 40 10 4 1
1.0
TJ = 25 OC
TJ = 25 OC
Pulse Width = 300ms 1% Duty Cycle
0.1
0
0.5
1.0
1.5
2.0
2.5
3.0
0
20
40
60
80
100
120
140
INSTANTANEOUS FORWARD VOLTAGE, (V)
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
25 THERMAL RESISTANCE, (OC/W) 20 15 10 5 0
FIG.4 TYPICAL REVERSE CHARACTERISTICS
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9 1.0
EQUAL LEAD LENGTH TO HEAT SINK, (IN.)
FIG.5 TYPICAL THERMAL RESISTANCE vs. LEAD LENGTH
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.

▲Up To Search▲

Price & Availability of 10A1-T

	To Download 10A1-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .